How To Remove Grease From Garage Door Tracks

Download Article

Download Article

An improperly maintained garage door can crusade it to become loud and squeaky. More importantly, a noisy door is a sign that your garage door isn't greased enough, which could lead to more serious damage later on. Luckily, with proper maintenance and lubrication, you can prevent the dissonance and extend the life of your garage door.^[1]

Things Yous Should Know

• Clean out your door'due south tracks by using a damp rag and a vacuum. That way, your rollers won't get stuck.
• Use lithium-based grease and garage door lube to clean the moving pieces of the garage door.
• Be sure to clean out the hinges, rollers, bearing plates, lock, and finally, the tiptop of the rail.

1. 1

   Close the garage door. Utilise the remote or shut the door manually. This will allow you to access the tracks and the rest of the moving parts on your door.

2. 2

   Cut power to the door. Before lubricating your door, you'll want to make sure that it'southward not on. Disconnect your garage door from the power source after you close it.^[2]

   • If the plug to your garage door opener is difficult to achieve or hard-wired, turn off the breaker that controls it in your excursion box.

   Advertisement

3. 3

   Clean out the tracks with a clammy rag. The tracks are what the garage door rollers ride on to open and shut. You lot don't want to lubricate these, but you lot practise want to make sure that they are completely cleaned out for your door to operate correctly. Wipe down the within of both tracks and remove whatever clay and debris.^[3]

   • Make sure that in that location is no debris left in your tracks that the rollers tin can go stuck on.
   • Use an automotive brake cleaner to loosen and wash away grime.

4. 4

   Vacuum out dirt and dust from your tracks. If you lot are having issues getting debris out of the tracks, you can use a vacuum with a hose extension to suck out the clay and debris. This is a keen solution to accomplish the higher portion of the tracks that yous may be having issues reaching.^[4]

Advertizing

1. 1

   Purchase a lithium-based grease or garage door lube. Pop standard degreasers like WD-40 aren't the best choice for a garage door.^[5] Instead, purchase a lithium-based grease at a hardware shop or online.^[six] There are also certain greases that are fabricated specifically for garage doors. Do not apply oil.^[seven]

   • Garage door grease volition typically come in an aerosol or spray can.
   • Oil is susceptible to dirt and dust buildup and is more than probable to drip than garage door grease or lube. Read the label to make sure that the grease that you are using is appropriate for your doors.

2. two

   Open up your door and spray the lubricant on each of the hinges. Slowly lift your garage door up manually and spray each swivel every bit it meets the bend of the runway. This will lubricate the moving parts on the door and will make opening and closing the garage door much smoother. Apply one or 2 sprays on each swivel. Your hinges should be covered in lubricant.^[8]

3. 3

   Lubricate the rollers. ^[9] The rollers are the circular moving pieces on your garage door and are attached to each of your hinges. Inside of these rollers are pocket-size brawl bearings that need to be lubricated for your door to open and shut smoothly.^[10] Use the sparse hose attachment to spray the grease inside of the rollers. Wipe out any excess lubricant and then your door doesn't become unbalanced.

   • Any exposed ball bearings must be thoroughly lubricated.
   • Don't spray any lubricant on nylon rollers.

4. 4

   Spray the outside of your springs and bearing plates. The springs can usually be establish at the top of the garage door and must be fully lubricated every bit well.^[xi] The bearing plates are the moving circular parts on both sides of the springs. Spray down the outside of the springs and near the middle of the bearing plates, then open and close your garage door to spread the grease around.^[12]

   • You lot volition nigh likely need a step ladder to reach the springs and bearing plates.
   • If your springs are making noises, you demand to grease your springs.
   • If your springs are damaged or bent, have them replaced earlier moving on.

5. 5

   Spray the lock and armbar. Lubricating the lock will make locking your garage door easier, and can prevent rust in the long run. Bespeak the lubricant towards the lock'south keyhole and spray it once to lubricate it. Once you're done lubricating the lock, finish lubricating your garage door past spraying the grease on the large armbar at the top of your door.^[xiii]

6. 6

   Lubricate the top of the rail. The rail is the portion that your chain rides on and should run along your garage'due south ceiling. The tiptop portion of the rail is what your chain really rides along, so it's the office that needs to be lubricated.^[14] Spray downwards the meridian of the runway and and so spread the grease around with a rag.^[xv]

   • The concatenation comes with a natural protectant on information technology that makes it so that you lot don't take to grease it regularly.
   • Spraying the lesser of the rail doesn't do anything.
   • Consult the owner's transmission to see how to lubricate and maintain your specific garage door opener.

Ad

Add New Question

• Question

  What should I practice to ensure that the garage door works properly?

  

  Patrick Johns is a Home Comeback Specialist and the Possessor of CatchAll Handyman Services. With more than than 28 years of feel, he has worked on a diversity of home comeback projects, such as carpentry, plumbing, and door and window installations in both commercial and residential backdrop.

  

  Abode Comeback Specialist

  Expert Respond

  Lubricate the parts from time to time to ensure that the garage door works properly. It will as well prevent them from rusting.

• Question

  Why is WD-40 not suitable for a garage door?

  

  Patrick Johns is a Dwelling Improvement Specialist and the Owner of CatchAll Handyman Services. With more than 28 years of feel, he has worked on a variety of home improvement projects, such as carpentry, plumbing, and door and window installations in both commercial and residential properties.

  

  Domicile Improvement Specialist

  Practiced Answer

  WD-twoscore is non suitable for a garage door because it can attract moisture, corrode, and crusade working mechanisms to suspension.

• Question

  Should I oil my garage door rollers?

  

  Barry Zakar is a professional handyman and the founder of Piffling Red Truck Abode Services based in the San Francisco Bay Expanse. With over 10 years of experience, Barry specializes in a variety of carpentry projects. He is skilled at constructing decks, railings, fences, gates, and various pieces of furniture. Barry likewise holds his MBA from John F. Kennedy Academy.

  

  No, exercise not use oil on your garage doors. Instead, employ grease or silicone spray, which is bachelor at whatsoever hardware or home improvement store.

Enquire a Question

200 characters left

Include your email accost to get a bulletin when this question is answered.

Submit

Advertisement

Video

• If lubricating the rollers doesn't work, consider replacing them with nylon or plastic rollers.^[16]

• Exist mindful of the black boxes at the bottom of your garage door. If you accidentally move one of them, the invisible axle will be obstructed and the garage door won't shut.

• If your garage door is not working properly, yous can supplant it and install a new door.

Advertisement

Things You'll Need

• Lithium based or garage door grease
• Rag
• Step ladder

Most This Article

Article Summary X

To lubricate a garage door, starting time close it and disconnect the ability by turning off the switch or circuit breaker. Then, clean the garage door tracks with a damp rag to get rid of whatever clay and debris. Once your door is clean, spray a lithium-based grease or garage door lube onto the hinges and rollers. Avoid using WD40 or oil, since these aren't every bit effective. In one case you lot've lubricated the hinges and rollers, spray the springs and bearing plates, which tin usually be establish at the top of your door. After that, spray the lock and armbar to brand unlocking your door easier. To finish lubricating your garage door, spray the superlative of the rail, which unremarkably runs from your door to the garage ceiling. For more tips, including how to clean tight spaces in your garage door with a vacuum, read on!

Did this summary help you?

Thank you to all authors for creating a page that has been read 411,074 times.

Did this article help you?

Source: https://www.wikihow.com/Lubricate-a-Garage-Door

Share this post